HiFi2 Board Example Linux Boot Log
Jump to navigation
Jump to search
U-Boot 2009.08 (Nov 15 2009 - 22:03:26)
CPU: Xtensa test_mmuhifi_c3 at 41.6777 MHz
Board: XT-AV200: Avnet board + Xilinx LX200 FPGA + Tensilica bitstream
SysRAM: 96 MB
Flash: 16 MB
In: serial
Out: serial
Err: serial
MAC: 00:50:C2:13:6f:07
IP: 192.168.11.105
open_ethernet
Autobooting in 5 seconds, press <SPACE> to stop
Using open_ethernet device
TFTP from server 192.168.11.55; our IP address is 192.168.11.105
Filename 'uImage.xtensa-2.6.29-smp.test_mmuhifi_c3'.
Load address: 0xd2000000
Loading: #################################################################
###############
done
Bytes transferred = 1161826 (11ba62 hex)
Automatic boot of image at addr 0xD2000000 ...
## Booting kernel from Legacy Image at d2000000 ...
Image Name: Linux-2.6.29-rc7
Image Type: Xtensa Linux Kernel Image (gzip compressed)
Data Size: 1161762 Bytes = 1.1 MB
Load Address: d0001000
Entry Point: d0001000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Linux Boot Params Starting At Address:0xd5f50000
MEMORY: tag:0x1003, type:0X1000, start:0X0, end:0X6000000
COMMAND_LINE: tag:0x1001, size:188, data:'console=ttyS0,38400 ip=192.168.11.105:192.168.11.55:192.168.11.1:255.255.255.0:"HiFi-2 Demo" root=/dev/nfs rw nfsroot=192.168.11.55:/exports/LINUX_ROOT.HiFi-2 debug coredump_filter=0xff'
SERIAL_BAUDRATE: tag:0x1004, size:4, baudrate:38400
## Transferring Control to Linux Kernel At Address 0xd0001000 ...
parse_bootparam: Ignoring tag 0x1004
lx60 platform_init(bootparams:d5f50000)
Linux version 2.6.29-rc7 (pdelaney@pdelaney_fc5.hq.tensilica.com) (gcc version 4.2.1) #201 SMP Tue Nov 17 23:49:39 PST 2009
lx60 platform_setup(cmdline[0]:'console=ttyS0,38400 ip=192.168.11.105:192.168.11.55:192.168.11.1:255.255.255.0:"HiFi-2 Demo" root=/dev/nfs rw nfsroot=192.168.11.55:/exports/LINUX_ROOT.HiFi-2 debug coredump_filter=0xff')
smp_init_cpus: Core Count = 3
smp_init_cpus: Core Id = 9320
On node 0 totalpages: 24576
free_area_init_node: node 0, pgdat d0196540, node_mem_map d01fa000
Normal zone: 216 pages used for memmap
Normal zone: 24360 pages, LIFO batch:3
smp_prepare_boot_cpu:
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 24360
Kernel command line: console=ttyS0,38400 ip=192.168.11.105:192.168.11.55:192.168.11.1:255.255.255.0:"HiFi-2 Demo" root=/dev/nfs rw nfsroot=192.168.11.55:/exports/LINUX_ROOT.HiFi-2 debug coredump_filter=0xff
trap_init 0
PID hash table entries: 512 (order: 9, 2048 bytes)
time_init: Platform Calibrating CPU frequency
time_init: ccount_per_jiffy:416777 [41.67 MHz], nsec_per_ccount:23
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 95196k/98304k available (1229k kernel code, 3040k reserved, 28k data, 72k init 0k highmem)
Calibrating delay loop... 41.26 BogoMIPS (lpj=206336)
Mount-cache hash table entries: 512
cpu 1 fffd
secondary_trap_init 1
Calibrating delay loop... 41.67 BogoMIPS (lpj=208384)
secondary_irq_init: set cached_irq_mask and enable interrupts))
secondary_time_init()
secondary_irq_enable(intrnum:6): cpu:1, INTENABLE:7c
secondary_irq_enable(intrnum:0): cpu:1, INTENABLE:7d
cpu 2 fff9
secondary_trap_init 2
Calibrating delay loop... 41.57 BogoMIPS (lpj=207872)
secondary_irq_init: set cached_irq_mask and enable interrupts))
secondary_time_init()
secondary_irq_enable(intrnum:6): cpu:2, INTENABLE:7c
secondary_irq_enable(intrnum:0): cpu:2, INTENABLE:7d
Brought up 3 CPUs
smp_cpus_done:
net_namespace: 304 bytes
NET: Registered protocol family 16
lx60_init()
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
msgmni has been set to 186
alg: No test for md5 (md5-generic)
alg: No test for des (des-generic)
alg: No test for des3_ede (des3_ede-generic)
alg: No test for stdrng (krng)
io scheduler noop registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
oeth_probe: {
oeth_setup: Open Ethernet Core Version 1.0.1
: oeth_setup: Found id1:2000, id2:5c30 at phy_id:3.
: Hardware MAC Address: 00:50:c2:13:6f:0f
eth0 (): not using net_device_ops yet
oeth_probe: }
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
oeth_open: Ready to process packets now on dev->name:'eth0', dev:d597d800;
IP-Config: Complete:
device=eth0, addr=192.168.11.105, mask=255.255.255.0, gw=192.168.11.1,
host="HiFi-2 Demo", domain=, nis-domain=(none),
bootserver=192.168.11.55, rootserver=192.168.11.55, rootpath=
Looking up port of RPC 100003/2 on 192.168.11.55
Looking up port of RPC 100005/1 on 192.168.11.55
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing unused kernel memory: 72k freed
Starting portmap: done
Initializing random number generator... done.
Starting network...
ip: RTNETLINK answers: File exists
Starting sshd: OK
Starting NFS statd: done
Starting NFS services: done
Starting NFS daemon: done
Starting NFS mountd: done
Starting domain name daemon: namedwarning: `named' uses 32-bit capabilities (legacy support in use)
failed
Fri Nov 20 17:10:37 2009
Mounting Other NFS Filesystems
Welcome to your custom Xtensa HiFi-2 Codec Developemnt System
hifi login: root
Password: linux1