Toolchain and Embedded Distributions: Difference between revisions
m (Typo fixes) |
|||
| (13 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
== [[Toolchain Overlay File]] == | |||
Because Xtensa is a configurable and extensible processor architecture that allows to define additional registers and instructions, the toolchain is the main software component that usually needs to be adapted for a specific Xtensa processor configuration. Tensilica provides a small set of configuration files in the form of an ''overlay'' that replace the versions in the toolchain sources. The [[Toolchain Overlay File]] is a version of that ''overlay'' provided by Tensilica with a specific format required for crosstool-NG and buildroot. A script to convert the ''overlay'' provided by Tensilica can be found under [[Toolchain Overlay File]] | |||
== Start from scratch with FSF/OSS sources == | == Start from scratch with FSF/OSS sources == | ||
Creating a toolchain and bootable root file system starting from sources is certainly the most challenging approach. It usually requires additional patches and sometimes matching versions of sources. While support for Xtensa is integrated in most toolchain tools, they | Creating a toolchain and bootable root file system starting from sources is certainly the most challenging approach. It usually requires additional patches and sometimes matching versions of sources. While support for Xtensa is integrated in most toolchain tools, they must be patched for a specific Xtensa processor configuration. The ''overlay'' mentioned above includes a necessary set of configuration files together with information explaining the process to patch the toolchain sources. | ||
'''Warning:''' cross compilers running on 64bit hosts are known to produce broken code. For some more details see the [http://lists.linux-xtensa.org/pipermail/linux-xtensa/Week-of-Mon-20130715/001140.html explanation] of Chris Zankel. | |||
== [http://crosstool-ng.org/ crosstool-NG] <small>([[crosstool-NG|build instructions for Xtensa]])</small> == | == [http://crosstool-ng.org/ crosstool-NG] <small>([[crosstool-NG|build instructions for Xtensa]])</small> == | ||
crosstool-NG (http://crosstool-ng.org/) provides a system to build a complete toolchain. It supports various C-libraries (Multilib, uClibc, glibc, and eglibc), but can also be used to build a 'bare' toolchain. | crosstool-NG (http://crosstool-ng.org/) provides a system to build a complete toolchain. It supports various C-libraries (Multilib, uClibc, glibc, and eglibc), but can also be used to build a 'bare' toolchain. Starting with release 1.22.0 the mainline crosstool-NG repository includes support for Xtensa. The process of patching the toolchain and other architecture specific software is fully automated using the [[Toolchain Overlay File]]. More information for building a toolchain for Xtensa using crosstool-NG can be found [[crosstool-NG|here]]. | ||
== [http://www.buildroot.org BuildRoot] <small>([[Buildroot|build instructions for Xtensa]])</small> == | |||
Buildroot is a set of Makefiles and patches that makes it easy to generate a cross-compilation toolchain and root file system for your target Linux system. The Xtensa architecture is fully supported in the official tree, including support for specific processor configuration using the [[Toolchain Overlay File]]. For build instructions, see [[Buildroot]]. | |||
== [http://www. | == [http://www.openadk.org OpenADK] == | ||
OpenADK is a set of Makefiles and patches that makes it easy to generate a cross-compilation toolchain and root file system for your target Linux system. The Xtensa architecture is fully supported, including support for specific processor configuration using the [[Toolchain Overlay File]]. At the moment only Qemu emulation (dc232b,dc233c) targets are available. New configurations can be simply added. | |||
Latest revision as of 20:39, 16 May 2017
Toolchain Overlay File
Because Xtensa is a configurable and extensible processor architecture that allows to define additional registers and instructions, the toolchain is the main software component that usually needs to be adapted for a specific Xtensa processor configuration. Tensilica provides a small set of configuration files in the form of an overlay that replace the versions in the toolchain sources. The Toolchain Overlay File is a version of that overlay provided by Tensilica with a specific format required for crosstool-NG and buildroot. A script to convert the overlay provided by Tensilica can be found under Toolchain Overlay File
Start from scratch with FSF/OSS sources
Creating a toolchain and bootable root file system starting from sources is certainly the most challenging approach. It usually requires additional patches and sometimes matching versions of sources. While support for Xtensa is integrated in most toolchain tools, they must be patched for a specific Xtensa processor configuration. The overlay mentioned above includes a necessary set of configuration files together with information explaining the process to patch the toolchain sources.
Warning: cross compilers running on 64bit hosts are known to produce broken code. For some more details see the explanation of Chris Zankel.
crosstool-NG (build instructions for Xtensa)
crosstool-NG (http://crosstool-ng.org/) provides a system to build a complete toolchain. It supports various C-libraries (Multilib, uClibc, glibc, and eglibc), but can also be used to build a 'bare' toolchain. Starting with release 1.22.0 the mainline crosstool-NG repository includes support for Xtensa. The process of patching the toolchain and other architecture specific software is fully automated using the Toolchain Overlay File. More information for building a toolchain for Xtensa using crosstool-NG can be found here.
BuildRoot (build instructions for Xtensa)
Buildroot is a set of Makefiles and patches that makes it easy to generate a cross-compilation toolchain and root file system for your target Linux system. The Xtensa architecture is fully supported in the official tree, including support for specific processor configuration using the Toolchain Overlay File. For build instructions, see Buildroot.
OpenADK
OpenADK is a set of Makefiles and patches that makes it easy to generate a cross-compilation toolchain and root file system for your target Linux system. The Xtensa architecture is fully supported, including support for specific processor configuration using the Toolchain Overlay File. At the moment only Qemu emulation (dc232b,dc233c) targets are available. New configurations can be simply added.