U-Boot: Difference between revisions

Latest revision as of 23:30, 2 March 2018

Under Construction - This page will describe the steps required to support a Xtensa processor configuration in U-Boot.

  $ xt-gdb -n u-boot
  (xt-gdb) target remote localhost:20000 0
  (xt-gdb) reset
  (xt-gdb) load
  (xt-gdb) continue

   U-Boot> protect off ...
   U-Boot> erase ...
   U-Boot> tftp u-boot.bin
   U-Boot> cp.b 2000000 F8000000 20000

@@ Line 1: / Line 1: @@
 Under Construction - This page will describe the steps required to support a Xtensa processor configuration in U-Boot.
+== U-Boot Installation to XTFPGA boards (LX60, LX200, ML605, KC705) ==
+=== Loading initial image through xocd + xt-gdb ===
+   $ '''xt-gdb -n u-boot'''
+   (xt-gdb) '''target remote localhost:20000 0'''
+   (xt-gdb) '''reset'''
+   (xt-gdb) '''load'''
+   (xt-gdb) '''continue'''
+=== Flashing U-Boot image ===
+    U-Boot> '''protect off ...'''
+    U-Boot> '''erase ...'''
+    U-Boot> '''tftp u-boot.bin'''
+    U-Boot> '''cp.b 2000000 F8000000 20000'''