U-Boot

From Linux/Xtensa
Revision as of 23:30, 2 March 2018 by Jcmvbkbc (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Under Construction - This page will describe the steps required to support a Xtensa processor configuration in U-Boot.

U-Boot Installation to XTFPGA boards (LX60, LX200, ML605, KC705)

Loading initial image through xocd + xt-gdb

  $ xt-gdb -n u-boot
  (xt-gdb) target remote localhost:20000 0
  (xt-gdb) reset
  (xt-gdb) load
  (xt-gdb) continue

Flashing U-Boot image

   U-Boot> protect off ...
   U-Boot> erase ...
   U-Boot> tftp u-boot.bin
   U-Boot> cp.b 2000000 F8000000 20000
Retrieved from "http://wiki.linux-xtensa.org/index.php?title=U-Boot&oldid=773"