Difference between revisions of "U-Boot"

From Linux/Xtensa
Jump to: navigation, search
(New page: Under Construction - This page will describe the steps required to support a Xtensa processor configuration in U-Boot.)
 
 
Line 1: Line 1:
 
Under Construction - This page will describe the steps required to support a Xtensa processor configuration in U-Boot.
 
Under Construction - This page will describe the steps required to support a Xtensa processor configuration in U-Boot.
 +
 +
== U-Boot Installation to XTFPGA boards (LX60, LX200, ML605, KC705) ==
 +
 +
=== Loading initial image through xocd + xt-gdb ===
 +
 +
  $ '''xt-gdb -n u-boot'''
 +
  (xt-gdb) '''target remote localhost:20000 0'''
 +
  (xt-gdb) '''reset'''
 +
  (xt-gdb) '''load'''
 +
  (xt-gdb) '''continue'''
 +
 +
=== Flashing U-Boot image ===
 +
 +
    U-Boot> '''protect off ...'''
 +
    U-Boot> '''erase ...'''
 +
    U-Boot> '''tftp u-boot.bin'''
 +
    U-Boot> '''cp.b 2000000 F8000000 20000'''

Latest revision as of 23:30, 2 March 2018

Under Construction - This page will describe the steps required to support a Xtensa processor configuration in U-Boot.

U-Boot Installation to XTFPGA boards (LX60, LX200, ML605, KC705)

Loading initial image through xocd + xt-gdb

  $ xt-gdb -n u-boot
  (xt-gdb) target remote localhost:20000 0
  (xt-gdb) reset
  (xt-gdb) load
  (xt-gdb) continue

Flashing U-Boot image

   U-Boot> protect off ...
   U-Boot> erase ...
   U-Boot> tftp u-boot.bin
   U-Boot> cp.b 2000000 F8000000 20000